DANIEL DEFENSE DDM4-MK18 (MIL SPEC+) SBR

Daniel Defense DDM4-MK18 (Mil Spec+) SBR 5.56 NATO
DDMK18-1aa
DDMK18-2aaDDMK18-3aaddm4-mk18-mil-spec-3addm4-mk18-mil-spec-4addm4-mk18-mil-spec-5addm4-mk18-mil-spec-6addm4-mk18-mil-spec-7addm4-mk18-mil-spec-8addm4-mk18-mil-spec-9a

DANIEL DEFENSE DDM4-MK18 (MIL SPEC+) SBR

1 in stock

$1,904.00

DDM4 MK18 (MIL SPEC +®)

 

Use what “THEY” use.  The Daniel Defense MK18 features the railed forend Daniel Defense currently provides to USSOCOM and a 10.3” Cold Hammer Forged Barrel.  The MK18 rail system features the Bolt-Up System has been rigorously tested prior to fielding by USSOCOM (currently over 15,000 units).  The 10.3” barrel is the same length in use for the MK18 upper most commonly used for CQB operations.  The MK18 Factory SBR by Daniel Defense is unmatched in size, weight, and performanceIntroduced in 2014, the MK18 is one of 4 models that is finished with the new Mil Spec + Cerakote.  This rifle also comes with the newly designed, rugged and comfortable Daniel Defense Buttstock and Pistol Grip.

 

NFA DISCLAIMER

This firearm is a regulated item by the National Firearms Act (NFA). Please check with your local and state municipalities for any further regulatory requirements. It is the buyer’s responsibility to make sure they comply with all NFA rules and applicable laws

 

MATERIALS & CONSTRUCTION

  • LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
  • UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
  • BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 twist, 10.3″ Government Profile, Chrome Lined, and Mil-Spec Heavy Phosphate Coated
  • GAS SYSTEM: Pinned Low Profile Gas Block CNC Machined of 4140 hardened steel with Mil-Spec Heavy Phosphate Coating, Carbine length, Direct Impingement
  • MUZZLE DEVICE: Daniel Defense Flash Suppressor, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
  • BOLT CARRIER GROUP: M16 Profile, Chrome Lined, Properly Staked Gas Key
  • BUFFER: H Buffer
  • SIGHTS: Sold Separately
  • HANDGUARD: Daniel Defense RIS II MK18, CNC Machined of 6061-T6 Aluminum, Type III Hard Coat Anodized and Cerakoted Mil Spec+
  • RECEIVER EXTENSION: 6 Position Mil-Spec 7075-T6 Aluminum
  • BUTTSTOCK: Daniel Defense Buttstock, Glass Filled Polymer with Soft Touch Overmolding
  • PISTOL GRIP: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding
  • RAIL PANELS: 3 Rail Panels made from Santoprene, heat resistant to 300° F.
  • FINISH: Mil Spec+ Cerakote
  • Made in the USA!

 

 

Additional Information
ManufacturerDaniel Defense
ModelMK-18  (MIL SPEC+)
ColorMil-Spec + Cerakote
TypeRifle: Semi-Auto
Caliber5.56 NATO
ActionSemi-Automatic
Capacity30+1
ReceiverMil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
TriggerMil-Spec DD Trigger
Barrel Length10.3″
Overall Length26.75″ (Collapsed)  29.875″ (Retracted)
Weight5.88 lbs
Accessories1 Daniel Defense 30 Round Magazine
Product UPC02-088-15028-011-

Additional Information Content

Reviews

There are no reviews yet.

Be the first to review “DANIEL DEFENSE DDM4-MK18 (MIL SPEC+) SBR”